The Value of Fall Safety Harness with Lanyard in the Construction Industry
There are many risks that workers need to go through when they carry out their jobs in the place where they are working. There have been strict requirements created by OSHA or the Occupational Safety and Health Agency to ensure the protection of workers in the workplace. The use of a fall safety harness with lanyard is one such example, especially for those who are working between 4 and 5 feet or even higher off the ground. The use of these sorts of equipment benefits a lot of workers, especially those that do construction work and any job that involves being regularly high in the air. These safety lanyards and harnesses have been noted to not only prevent serious injury but also save lives.
You can find various kinds of safety harnesses. There are three different parts that make up a harness that protect you from being seriously hurt when you fall. These three parts include the lanyard, the harness, and the anchor point. If you talk about harnesses, there are four classes that you can choose from depending on your safety needs as worker. Workers who only need a small amount of support can make the most of a basic harness as the first class of harness. For these workers, there is not a lot of falling risk that they will go through. Nevertheless, if you want to be on the safe side than on the sorry side, then you have to bear with using this safety harness with lanyard.
The second class of safety harness comes with a chest device. When you get this device, your entire upper body will be properly secured as a worker. Using this harness is every common for those who have jobs that require them to be lowered into an enclosure or building and be removed at a low speed. For the third class of safety harness, you can refer to it as a full body safety harness. For this harness type, you will find straps for both the lower and upper torso. This keeps workers protected from more serious falls that begin at heights of 25 feet or higher. When it comes to the last type of safety harness, it is often similar in some aspects with the first type. Much like the first one, you can expect this harness to come with a belt. However, they are intended for protecting workers who work in more difficult work places. The same type of harness is used for workers who need to be lowered in an unsafe environment.
Safety lanyards often go hand in hand with fall safety harnesses. These ropes are utilized to make a connection between the harness and the anchor point. You can expect the use of varying materials for these lanyards. Each material comes with a certain degree of flexibility and strength. The kind of safety harness with lanyard that you choose will once again depend on the kind of job you are doing.